LG L1734S-BN - Manual (Page 7)

A6
Using the Computer
1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form
to . 1
2.
Press button on the front switch panel to turn the
power on. When monitor power is turned on, the 'Self
Image Setting Function' is executed automatically.
2
Connecting the Display
A
B
Connect Dsub Cable (PC). When attached, tighten the thumbscrews to secure the connection.
Connect Dsub Cable (Mac)
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard
compliance for the product.
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When
the user connects the monitor for the first time, this function automatically adjusts the display to optimal
settings for individual input signals.
‘AUTO Function? When you encounter problems such as blurry screen, blurred letters, screen flicker
or tilted screen while using the device or after changing screen resolution, press the AUTO function
button to improve resolution.
Wall-outlet type
MAC
Power Cord 1 2
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2 row connector.
PC
Varies according to model.
Signal Cable