LG LHB975 - Manual (Page 25)

25 Installation
3
Installation
Resolution Setting
The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1. Press HOME ( ).
2. Use I/i to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
3. Use U/u to select [DISPLAY] option then
press i to move to the second level.
4. Use U/u to select the [Resolution] option
then press ENTER ( ) or i to move to the
third level.
5. Use U/u to select the desired resolution
then press ENTER ( ) to confi rm your
selection.
NOTE
• If your TV does not accept the resolution you
have set on the player, you can set resolution to
480p as follows:
1. Press Z to open the disc tray.
2. Press x for more than 5 seconds.
• Since several factors aff ect the resolution of
video output, see “Video Output Resolution” on
page 105.
Antenna connection
Connect the supplied antenna for listening to
the radio.
Antenna Connection
Player Player
NOTE
• To prevent noise pickup. keep the AM Loop
antenna away from the unit and other
components.
• After connecting the FM wire antenna, keep it as
horizontal as possible. Be sure to fully extend the
FM wire antenna.
HB965PZT-AD.BUSALL_ENG_6864.indd 25 HB965PZT-AD.BUSALL_ENG_6864.indd 25 10. 10. 20 9:16 10. 10. 20 9:16