LG WM8000HWA - Manual (Page 26)

26 USING YOUR WASHING MACHINE
Adjusts the melody and button tones,
SIGNAL
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The melody and button tones can be changed and
off as desired.
1 Press A .
2 Turn
B
to the desired cycle.
3 Press
. Adjust the melody and button tones as
desired.
4 Press the desired option to use the other options.
5 Press C .
Prewashing, PRE-WASH
Pre-wash for 15 minutes when clothes are covered in dirt or
dust. This feature is suitable for heavily soiled items.
1 Press A and turn
B
to the desired cycle.
2 Press .
- light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press C .
Rinse, drain and spin only, RINSE+SPIN
Use this cycle to rinse detergent from load.
1 Press A and turn
B
to the desired cycle.
2 Press .
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Pulse C .
Drum Lighting, DRUM LIGHT
The drum is equipped with a white LED light that illuminates
when the washer is turned on. This light automatically turns
off when the door is closed and the cycle starts. To turn on
the light during a cycle.
1 Press A and turn
B
to the desired cycle.
2 Press C .
3 Press and hold for 3 seconds during the wash
cycle.
- The drum light will illuminate and then turn off
automatically after 4 minutes.
- Clothes and the gasket may look like yellow due to
lights of the lamp, but it is normal.
Tumbles clothes to prevent wrinkles,
FRESH CARE
Use this function when you are not able to take out your
clothes as soon as the wash cycle ends.
1 Press A and turn
B
to the desired cycle.
2 Press and hold for 3 seconds during the wash
cycle.
-
light will turn on.
3 Select any desired options.
- Skip to step 4 if you would like to use the default
settings without changing or adding any options.
4 Press C .
NOTE
y This function provides periodic tumbling for up to
about 19 hours to prevent wrinkles. If you press the
START/ PAUSE or ON/ OFF button, you can unload
your laundry at anytime.
Adding extra rinse cycle, EXTRA RINSE
You can add an extra rinse cycle to the default rinse cycle.
1 Press A and turn
B
to the desired cycle.
2 Press .
- light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press C .