LG WM3001HWA - Manual (Page 25)

H O W TO U S E
SECONDARY FUNCTIONS
The special function buttons also activate
secondary functions, including CHILD LOCK,
DRUM LIGHT, and LANGUAGE. Press and hold
the button marked with the secondary function
for 3 seconds to activate.
CHILD LOCk
Use this option to prevent
unwanted use of the washer or
to keep cycle settings from being
changed while the washer is
operating. Press and hold the PRE WASH button
for 3 seconds to activate or deactivate CHILD
LOCK.
CHILD LOCK will be shown in the display, and all
controls are disabled. The washer can be locked
during a cycle.
DRUm LIgHT
The drum is equipped with a blue
LED light that illuminates when
the washer is turned on. This light
automatically turns off when the
door is closed and the cycle starts. To turn on
the light during a cycle, press and hold the TUB
CLEAN button for 3 seconds. The drum light will
illuminate and then turn off automatically after 4
minutes.
LANgUAgE
This option allows you to change
the language shown in the display.
Once set, the selected language
will stay set even after the power is
turned off.
The display language options are English, French,
and Spanish; English is the default language.
To change the language:
Press the ON/OFF button to turn on
the washer.
Press and hold the OPTION button for
3 seconds, until the following screen appears
in the display.
When OPTION is pushed, English is
displayed as the default language.
Press the TUB CLEAN button to select
FRANÇAIS(French) or DELAY WASH for
ESPAÑOL(Spanish).
1
2
3
LANGUAGE
USE THE TOGGLE KEY
ESPAÑOL
FRANÇAIS
EXIT
ENGLISH
CUSTOm PROgRAm
CUSTOM PROGRAM allows you
to store a customized wash cycle
for future use. It allows you to
save favorite temperature, spin
speed, soil level, and other options for a cycle,
and then recall them at the touch of a button.
To store a Custom Program:
Select a cycle.
Adjust the Wash/Rinse Temperature, Spin
Speed, and Soil Level to the desired settings.
Set any other desired options.
Press and hold the CUSTOM PROGRAM
button for 3 seconds. You will hear two
beeps to confirm the settings have been
stored.
1
2
3
4
IMPORTANT: If you press and hold the CUSTOM
PROGRAM button for 3 seconds, you will
overwrite any previously stored CUSTOM
PROGRAM.
To recall a Custom Program:
Press and release the CUSTOM PROGRAM
button. The stored settings will be displayed.
Press and release the START/PAUSE button
to start the cycle. The washer will start
automatically.
1
2
LOAD SIZE
At the beginning of the cycle,
the washer tumbles the load and
detects the weight of the clothes.
The display will indicate the
approximate load size in the LOAD SIZE display.
This allows you to adjust the amount of detergent
and other additives for best results and improved
efficiency.
2