LG WM2240CW - Manual (Page 15)

ENGLISH
H O W TO U S E
CONTROL PANEL FEATURES
POWER ON/OFF BUTTON
Press to turn the washer ON. Press again to
turn the washer OFF.
NOTE: Pressing the ON/OFF button during
a cycle will cancel that cycle and any load
settings will be lost.
CYCLE SELECTOR kNOB
Turn this knob to select the desired cycle.
Once the desired cycle has been selected,
the standard presets will be shown in the
display. These settings can be adjusted using
the cycle settings buttons anytime before
starting the cycle.
START/PAUSE BUTTON
Press this button to START the selected
cycle. If the washer is running, use this
button to PAUSE the cycle without losing the
current settings.
NOTE: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle,
the washer automatically turns off.
A
B
CYCLE SETTINGS BUTTONS
Use these buttons to adjust the desired cycle
options for the selected cycle.
TIME AND STATUS
The display shows the selected settings
and options, as well as the estimated time
remaining in the cycle.
OPTION BUTTON
The option buttons allow you to select
additional cycle options and will light when
selected. Certain buttons also allow you to
activate special functions by pressing and
holding the button for 3 seconds.
For detailed information about the individual
options, please see the following pages.
D
E
C
F
B A C
E
F
D
F
15
MFL67360401_en_110726.indd 15 2011.7.26 10:47:35 AM