Using the computer, Connecting the display – LG W2234S-BN User Manual
Using the Computer
Make sure to turn off the computer and product.
Connect Signal cable and Power cord in order, then tighten the screw of the
Press button on the front switch panel to turn the
power on. When monitor power is turned on, the 'Self
Image Setting Function' is executed automatically.
Connecting the Display
Connect Dsub Cable (PC)
Connect Dsub Cable (Mac)
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard
compliance for the product.
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically
adjusts the display to optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred
letters, screen flicker or tilted screen while using the device or after changing screen
resolution, press the AUTO/SET function button to improve resolution.
For Apple Macintosh use, a separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
Varies according to model.