LG LW1513ER - Manual (Page 13)

10
13
A Type
screws.
5.
6.
1. Open the window. Mark a line on the center of
the window stool .
Loosely attach the sill bracket to the support
bracket using the carriage bolt and the lock nut.
Support
Bracket
Lock nut
Sill
Bracket
Carriage
Bolt
2. Attach the sill bracket to the window sill using
the screws (Type B).
Carefully place the cabinet on the window stool
and align the center mark on the bottom front
with the center hole marked window stool.
Screw (Type B)
Sill bracket
3. Using the screw (Type D) and the lock nut, attach
the support bracket to the cabinet track hole. Use
the first track hole after the sill bracket on the
outer edge of the window sill. Tighten the
carriage bolt and the lock nut. Be sure the
cabinet slants outward.
Cabinet
Track hole
Support
Bracket
Carriage bolt
and lock nut
Machine screw(Type D)
and lock nut
Outer edge
of window
sill
Front angle
Window stool
Top
retainer
bar Do not drill a hole in the bottom pan. The unit is
designed to operate with approximately 1/2" of
water in bottom pan.
4. Pull the bottom window sash down behind the
t op retainer bar until they meet.
frame curtain upper guide
frame guides.
Right Guide Panel
Upper guide
(Type A)
Screws
Frame guide
Left Guide panel