LG CF3DAT - Manual (Page 32)

TIME
Clock ꔉ
Off Time : Off
On Time: Off
Sleep Timer: Off
Auto Off : 10 min.
ꔂ Move ꔉ OK
TIME
Clock ꔉ
Off Time : Off
On Time : Off
Sleep Timer: Off
Auto Off : 10 min.
ꔂ Move ꔉ OK
Function
32
Time Function
TIME
Clock ꔉ
Off Time : Off
On Time : Off
Sleep Timer: Off
Auto Off : 10 min.
ꔂ Move ꔉ OK
Setting Current Time
1. Press the MENU button, then go to Time with the ∧, ∨, ＜, ＞ buttons
and press OK .
2. Press ∧, ∨ buttons to go to Clock and press OK .
< Auto Setup >
3. Press ＜, ＞ buttons to set Auto.
In the case of digital broadcasting, date and time are automatically set when
the projector receives information from a broadcasting station. Current time
may not be automatically set or may be incorrect depending on the broadcast-
ing station signal. If the current time is incorrect, use Manual to set it again.
< Manual Setup >
3. Press
＜, ＞ buttons to go to Manual.
4. Press the ∧, ∨, ＜, ＞ buttons to set Year/Month/Date/Hour/Minute.
ꔈ If there is a blackout or the power plug is disconnected from the power outlet, the current time is deleted and must be set again.
ꔈ Press the BACK button to exit the menu screen.
* You can check or change the time while using the projector.
ꔗ A u t o ꔃ
01
2011
21
10 AM
41
Close
Month
Date
Year
Hour
Minute
Time Zone
Daylight
Saving
Scheduling On and Off
* You can set the On/Off Time of the projector.
1. Press the MENU button, then go to Time with the ∧, ∨, ＜, ＞ buttons
and press OK .
2. Press ∧, ∨ buttons to go to Off Time or On Time and press OK .
3. Press ∧, ∨, ＜, ＞ buttons to set Repeat.
4. Press ∧, ∨, ＜, ＞ buttons to set Hour/Minute/Input/Channel/Volume.
Options Description
Repeat If you did not set Power On/Off Time, select Off in Repeat.
Hour/
Minute
Sets Hour/Minute of Power On/Off Time.
Input/
Channel
Sets Input/Channel when the projector is turned on.
If the input is set to TV, the channel can be one of DTV/TV/
DTV Cable/TV Cable.
If the input is set to external, no channel is available.
Volume Sets the volume when the projector is turned on.
ꔈ This works normally only when current time is configured. If Off Time and
On Time are the same, Sleep takes priority when the projector is on and Power On takes priority when the projector is off.
ꔈ Although the projector can be turned on by the On Time function, it is automatically turned off if no button is pressed
within 120 minutes. This is a convenient function if you are away from your home for a long period of time.
ꔈ Press the BACK button to exit the menu screen.
ꔗ Once ꔃ
11 PM
00
Close
Repeat
Hour
Minute
ꔎ Jan. 21, 2011 10:30 AM
ꔗ Off ꔃ
6 AM
30
TV
TV 2-0
10
Close
Repeat
Hour
Minute
Input
Channel
Volume
ꔎ Jan. 21, 2011 10:41 AM
Eastern
Auto