LG CF3DAT - Manual (Page 46)

Function
46
Transmission
[k] [i] [ ] [Set ID] [ ] [Data] [Cr]
Data Min : 0 - Max : 64
(* Transmitted in hexadecimal code)
Ack
[i] [ ] [Set ID] [ ] [OK] [Data] [x]
Data Min : 0 - Max : 64
* Refer to the actual data structure 1.
⇒ Adjusts screen color.
08. Color (Command : ki)
Transmission
[k] [k] [ ] [Set ID] [ ] [Data] [Cr]
Data Min : 0H - Max : 64H
(* Transmitted in hexadecimal code)
Ack
[k] [ ] [Set ID] [ ] [OK] [Data] [x]
Data Min : 0H - Max : 64H
* Refer to the actual data structure 1.
⇒ Adjusts screen sharpness.
* This function is used when a remote control is not being used.
When the remote control lock is On, all the buttons on the control
panel and remote control
do not support the Set function.
Transmission
[k] [j] [ ] [Set ID] [ ] [Data] [Cr]
Data Red : 0H - Green : 64H
(* Transmitted in hexadecimal code)
Ack
[ j ] [ ] [Set ID] [ ] [OK] [Data] [x]
Data Red : 0H - Green : 64H
* Refer to the actual data structure 2.
⇒ Adjusts screen color.
09. Tint (Command : kj)
10 . Sharpness (Command : kk)
Transmission
[k] [l] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: OSD Select Mode Off
1: OSD Select Mode On
Ack
[l] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0: OSD Select Mode Off
1: OSD Select Mode On
⇒ Selects OSD On/Off.
11 . OSD Select (Command : kl)
Transmission
[k] [m] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: Lock Off
1: Lock On
Ack
[m] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0: Lock Off
1: Lock On
⇒ Sets the function of locking the remote control and
local keypad of the remote control.
12. Remote Control Lock /Key Lock
(Command: km)
Transmission
[k] [t] [ ] [Set ID] [ ] [Data] [Cr]
Data L: 0H - R : 64H
(* Transmitted in hexadecimal code)
Ack
[t] [ ] [Set ID] [ ] [OK] [Data] [x]
Data L: 0H - R : 64H
* Refer to the actual data structure 2.
⇒ Adjusts Audio Balance.
13 . Balance (Command : kt)
Transmission
[m] [b] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: Delete 1: Add
(* Transmitted in hexadecimal code)
Ack
[b] [ ] [Set ID] [ ] [OK] [Data] [x]
⇒ Adds/Deletes a channel.
15. Channel Add/Del (Command: mb)
Transmission
[k] [u] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: Medium 1: Cool 2: Warm 4.Natural
(* Transmitted in hexadecimal code)
* 3 is not used.
Ack
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0: Medium 1: Cool 2: Warm 4: Natural
⇒ Adjusts the value of color temperature.
14. Color Temperature (ACC) (Command: ku)
Data 0: Delete 1: Add
* This function is used when the remote control is not being
used. If remote control lock is On, none of the buttons of the
local keypad and remote control will work.