LG PA75U - Manual (Page 30)

30 WATCHING WITH THE PROJECTOR
Using the Projector
Turning on the Projector
1
Connect the power cord correctly.
2
After waiting for a moment, press
the POWER button on the remote
control or the control panel.
(The light on the control panel will be
turned on.)
y y Check if the lens cap is open before
turning on the projector.
3
In the Language Selection screen,
select a language.
4
Select an input signal by using the
INPUT button on the remote control.
Focus and Position of the
Screen Image
When an image appears on the
screen, check if it is in focus and
fits the screen properly.
Focus Ring
y y To adjust the focus of the image,
rotate the focus ring.
Using the Projector
1
In Standby mode, press the POWER
button to turn the projector on.
2
Press the INPUT button and select
the input signal you want.
3
Control the projector using the
following buttons while watching the
screen.
Button Description
CH ∧, ∨ Changes the TV channel.
List Displays the channel list.
0 - 9 Enters a channel number.
VOL -, + Adjusts the volume level.
MUTE Mutes the sound of the
projector.
FLASH-
BK
Displays the channel
you were watching previ-
ously.
Key's
▲, ▼
Adjusts the Keystone
settings.
4
To turn the projector off, press the
POWER button.