LG CM8430 - Manual (Page 30)

Operating 30
Oper
ating
3
Radio Operations
Listening to the radio
1. Select tuner(FM/AM) function by using
FUNCTION.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING-/+ on the remote
control or turn Y/U knob on the unit
clockwise or counterclockwise and hold it
for about two seconds until the frequency
indication starts to change, then release.
Scanning stops when the unit tunes in a station.
Manual tuning :
Press TUNING-/+ on the remote control or
turn Y/U knob on the unit clockwise or
counterclockwise repeatedly.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Improving poor FM reception
Press on the unit or d/M on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Select tuner(FM/AM) function by using
FUNCTION.
2. Select a radio station you want to preset by
using TUNING-/+ on the remot control.
3. Press TUNER MEMORY. A preset number will
blink in the display window.
4. Press PRESET.FOLDER W/S to select the
preset number you want.
5. Press TUNER MEMORY. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
PRESET.FOLDER W/S or 0 to 9 numerical
buttons.
Deleting all the saved stations
1. Press and hold TUNER MEMORY for two
seconds.
“ERASE ALL” will flash up on the unit display.
2. Press TUNER MEMORY to erase all the saved
radio stations.
CM8430-AB_DUSALLK_ENG.indd 30 2013-01-24 �� 8:09:25