LG LFX25961ST - Manual (Page 30)

30
REPLACING LIGHT BULBS
w WARNING
Electrical Shock Hazard
• Before replacing a burned-out light bulb, either
unplug the refrigerator or turn off the power at the
circuit breaker or fuse box.
NOTE: Moving the control to the OFF position does
not remove power to the light circuit.
NOTE: Not all appliance bulbs will fit your refrigerator.
Be sure to replace the bulb with one of the same size,
shape, and wattage.
To Change the Refrigerator Light Bulbs
To remove the lamp cover, remove the top
shelf or shelves. Use a flat instrument to
gently pry the lamp cover loose in the front. 1 Rotate the lamp cover downward to remove
the rear tabs. Make sure bulbs are cool.
Turn the bulbs counterclockwise to remove.
Insert new bulbs. Assemble in reverse order
by engaging the rear tabs of the lamp cover
first, followed by the front tabs.
2
To Change the Freezer Light Bulb
Use a flat instrument to gently pry the lamp
cover loose in the front.
NOTE: It may be necessary to remove the top
rack to provide access to the lamp cover.
1 Rotate the lamp cover downward to remove
the rear tabs. Make sure the bulb is cool. Turn
the bulb counterclockwise to remove. Replace
with a new 60-watt appliance bulb. Insert tabs
on the back of the cover into the slots in the
freezer ceiling. Push the cover upward to
snap the front into place. 2