LG HR925S - Manual (Page 27)

3 System Setting
System Setting 27
S
ys
tem Se
tting
3
Auto Set UP
You can reset the recorder to all its factory settings.
Some options cannot be reset (Rating and
Password). The [Auto Setup] menu appears on the
screen after the factory settings.
Step 1. Language Setting
1. Use W/S/A/D to select a language for the
on-screen display, and press ENTER (b).
Step 2. Channel Setting
1. Use W/S/A/D to select a country, and
press ENTER (b).
2. Input the new password using numerical
buttons. Enter it again to verify.
3. If you want to set the additional satellite setting,
select [Detail Setting] on the menu. You can set
the satellite option, also add the satellites that
you want to search.
[Detail Setting]
Refer to Step 3-5 of “Satellite Setting” on page
15-16.
[Search type]
Refer to Step 7 of “Satellite Setting” on page 16-
17.
4. While the Start option is selected, and press
ENTER (b) to begin the channel search.
The recorder automatically searches for and
saves the programmes.
If you select [Stop], the [Channel Setting]
function will be skipped.
5. Press ENTER (b).
Step 3. Time Setting
1. Use A/D to select an option among [Manual]
or [Auto], and press ENTER (b).
Auto: Set the programme that broadcasts
a clock signal and the clock will be set
automatically.
If the time that has automatically set is not
correct comparing your local time, you can set
additional time option.
Manual: If there is no channel that broadcasts
a clock signal in your area, you can set the time
and date manyally. Use W/S to select each
field, and input correct time and date using A/
D. You can use numerical buttons.
2. Press ENTER (b) to complete the time setting.