LG HR925S - Manual (Page 29)

System Setting 29
S
ys
tem Se
tting
3
Settings
Adjust the Setup Settings
You can change the settings of the player in the
[Setup] menu.
1. Press HOME (n).
2. Use A/D to select [Setup] and press ENTER
(b). The [Setup] menu appears.
3. Use W/S to select the first setup option, and
press D to move to the second level.
4. Use W/S to select a second setup option,
and press ENTER (b) or D to move to the third
level.
5. Use W/S to select a desired setting, and press
ENTER (b) or D to confirm your selection.
Satellite Setting
This recorder needs some settings in advance for
satellite antenna (see pages 15-17).
Editing Programme List
(Channel Edit)
You can remove any digital TV or radio programs
stored on this recorder using the [Channel Edit]
menu.
1. Display [Setup] menu.
2. Use W/S to select [DTV], and press ENTER
(b).
3. Use W/S/A/D to select [Channel Edit] and
press ENTER (b).
4. Press W to select [DTV] and use A/D to select
[DTV] or [Radio] programme list.
5. Use W/S/A/D to select a programme you
want to skip from the list, and press red (R)
coloured button.
If you do not want to skip the programme,
select the programme and press red (R)
coloured button again.
Use W/S/A/D to select a programme you
want to lock from the list, and press blue (B)
coloured button.
If you do not want to lock the programme,
select the programme and press blue (B)
coloured button again.
6. Press BACK (1) to return to the previous step.
Skip : If the programme is assigned to skip, you
can’t select that programme with CH button in
Remote control.
EDIT (It is allowable when Automatic
Numbering is not set): Choose a channel you
want. Press green (G) coloured button and then
change the location of channel by using W/
S/A/D.
Block/unblock : If the programme is assigned
to block and [DTV Lock] in the [Setup] menu is
set to [Lock], you should enter the password to
watch the programme.