LG GR-181LA - Manual (Page 8)

Check that the hot air caused to warm air from the rear
of the appliance circulates without obstruction. If not, it
could cause the output of the refrigerating unit to
increase and this will result in a higher rate of energy
consumption. Therefore, confirm that ventilation grill is
never covered or blocked.
1. when installing with top
table(free standing),
push the refrigerator
until the air
circulating hole of top
table nearly reaches
the wall.
2. when installing without
top table, align the door
front edge to the front edge of
kitchen furniture.
How to Remove Top Table
1. Unscrew 2 bolts at
the rear of top table.
2. Hold the rear of top
table and push
forwards by lifting up
top table slightly.
Installation with/
without top table
Installation
1
2
Electrical connection
This appliance should be connected to the mains AC
220~240V , 50 Hz. You must connect this appliance only
to the power socket with grounding complying with the
related regulations and only an approved expert should
install this appliance.
Door Handle
In case of installing the door handle, refer to a figure
enclosed with it in a product package.
9