Belt clip & optional headset – AT&T 1165 User Manual
Page 11
Advertising
9
Getting Started
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results use an AT&T 2.5 mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap)
ATT-1465CIB-d04.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 9
Advertising
This manual is related to the following products: