LG ARNU07GQAA2 - Manual (Page 9)

Operating Instructions
Ownerʼs Manual 9
Name and Function of Wireless Remote Controller(Accessory)
Cooling mode
Auto mode or auto changeover
Dehumidification mode
Heating mode
Fan mode
• Cooling model( ), Heat pump model( )
Operation Mode
PQWRCDF0 (Heat pump)
PQWRHDF0 (Cooling only)
13
14
15
16
1
8
9
10
11
12
2
3
4
5
6
7
1. Plasma button (Optional).
Used to start or stop the Ion generator.
2. Jet cool button
Speed cooling operates super high fan speed.
3. Operation mode selection button
Used to select the operation mode.
4. Used to set auto clean, smart clean, floor
heating and Upper vane control on respec-
tive key stroke.
5. Used to adjust LCD luminosity also for ad-
justing the upper vane angle followed by 4 th
number key
6. Smart clean button(optional)
Used to start or stop smart clean.
7. Clean button
Used to clear all timer.
8. Room temperature setting button
Used to select the room temperature.
9. On/Off button
Used to turn on/off the unit.
10. Indoor fan speed selection button
Used to select fan speed in four steps low,
medium, high and chaos.
11. Auto swing button
Used to stop or start louver movement and set
the desired up/down airflow direction.
12. Horizontal airflow direction control
button(optional)
Used to set the desired horizontal airflow direc-
tion.
13. Timer and time setting button
Used to set the time of starting or stopping and
sleeping operation.
14. Room temperature checking button
Used to check the room temperature.
15. °C/°F switch button
Used to switch temperature reading from Cel-
sius to Fahrenheit.
16. Reset button
Used to reset the remote controller.
ENGLISH