Abit AW9D-MAX - Manual (Page 41)

BIOS Setup
AW9D-MAX, AW9D 3-5
LED Effect Control (For model “AW9D-MAX” only)
This item selects the displaying mode for all the LEDs located at the bottom side of the
motherboard.
[All OFF]: All the LED lights off.
[All ON]: All the LED lights on without any flashing effect.
[MODE 1 ~ MODE 6]: All the LED lights on with the flashing effect by one of these modes.
Temperature Monitoring
Click <Enter> key to enter its submenu:
µGuru Utility v1.00C
ABIT EQ
Temperature Monitoring
Reading Shutdown
Enable
Shutdown
Temp. Beep
Enable Beep
Temp.
(*)CPU Temperature 59
°C/138°F (*) 85°/185°F (*) 75°C/167°F
(*)System Temperature 42
°C/107°F ( )
65
° °
C/149
°F (*) 55°C/131°F
(*)PWM1 Temperature 60
°C/140°F ( )
90
° °
C/194
°F (*) 80°C/176°F
(*)PWM2 Temperature 60
°C/140°F ( )
90
° °
C/194
°F (*) 80°C/176°F
(*)PWM3 Temperature 60
°C/140°F ( )
90
° °
C/194
°F (*) 80°C/176°F
(*)PWM4 Temperature 60
°C/140°F ( )
90
° °
C/194
°F (*) 80°C/176°F
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
CPU Temperature/System Temperature/PWM1~4 Temperature
These items display the temperature of CPU, System, and Power Module.
- Shutdown Enable
Use <Space> key to enable system shutdown function. If the CPU/System/PWM’s temperature
exceeds the shutdown temperature limit, the system will shutdown automatically.
- Shutdown Temp.
This items sets the temperature that will shutdown the system automatically in order to prevent
system overheating.
- Beep Enable
Use <Space> key to enable warning beeps function. Once the system has detected that the
CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will
sound.