ATI Technologies THEATER 550 - Manual (Page 12)

7
CHAPTER 3:
Installing Software
This chapter will guide you through the installation of the drivers and
software associated with your THEATER™ 550 PRO TV tuner card.
Note: In order to use your THEATER™ 550 PRO TV tuner card,
you will need to install CyberLink PowerCinema or ATI Multimedia
Center, or use Windows® XP Media Center Edition® 2005.
Installing Drivers and Software in
Windows®
You will need to install the THEATER™ 550 PRO TV tuner card drivers
and software in the following cases:
• After you have installed the card in your system.
• After you have reinstalled or upgraded your operating system.
This procedure applies to Windows® XP.
Software Installation Prerequisites
To install or remove the drivers, you must have administrator rights or be
logged on as a user with administrator rights.
Your operating system must be installed and running before you can
install the THEATER™ 550 PRO TV tuner card drivers. We also
recommend that you have the latest Service Pack installed.
Note: The installation dialog will display in English if your
operating system’s language is not supported.
THEATER 550.book Page 7 Friday, January 21, 2005 9:31 AM