AT&T RIM BlackBerry Bold MDC 9000 - Manual (Page 14)

How to Use the Features
The following procedures give short, step-by-step instructions for using each feature.
For your convenience, features are listed alphabetically.
Special Instructions for General Use
As you operate the features assigned to your telephone, keep in mind the following
general rules.
Carefully follow all the steps in the procedure for each feature you are using.
If you receive an intercept tone (high-pitched, alternating high and low tone)
while attempting to operate any feature, you have taken too much time to
complete a procedural step or have made a dialing error. Hang up or press the
(unlabeled) Drop button, get a dial tone, and begin again at the first step.
In most cases, before you begin a procedure, you must have the handset
off-hook (removed from the base of the telephone).
To the right of each Phone Feature is a box marked with a check ( ). This
check will remind you that you can use the feature immediately, without help
from your system manager.
Conventions Used in Procedure Descriptions
In this guide, the following conventions are used in the procedure descriptions:
xxxxx This box represents a call appearance button which is
used exclusively for placing or receiving calls. The
button is labeled with an extension number (shown as
xxxxx).
Feature and
Feature xxxxx
Each of these boxes represents a button that has a
feature assigned to it. The button is labeled with the
feature name, sometimes followed by an extension
number or a person’s name (shown as xxxxx).
[feedback tone] The tone that appears in brackets after a step indicates
what you should hear from your handset after
successfully performing that step.
For a list of tones and their meanings, see the section titled Tones and Their
Meanings.
9