AT&T RIM BlackBerry Bold MDC 9000 - Manual (Page 21)

5 Dial personal list code (1, 2, or 3)
Version Note: If you are using System 75,
Version 1, you may omit this step.
6 Dial list item (1, 2, 3...) [dial tone]
7 Dial outside number, extension, or feature code you
want to store (up to 24 digits)
Version Note: If you are using System 75,
Version 1, you can use only up to 16 digits.
8 Press # [confirmation tone]
Number is stored
Repeat Steps 4 through 8 if you want to program
additional items on the same list; hang up and
begin again at Step 1 if you want to program
items on another personal list
9 Hang up to end programming
Note: Keep your own personal lists in the
Abbreviated Dialing table provided in the back of
this booklet; group, system, and enhanced lists are
available from your system manager.
To place a call using a
personal, group, system,
or enhanced list
(enhanced lists apply to
Generic 1 or Generic 3
only) 1 Pick up handset
2 Press On/Off
3 Press an available line button [dial tone]
4 Dial appropriate Abbreviated Dialing List access
code:
List 1 __________
List 2 __________
List 3 __________ [dial tone]
5 Dial desired list item (1, 2, 3...)
Stored number is automatically dialed
16