Multi-tasker – Altinex MT105-101 User Manual
Page 17
MULTI-TASKER™
400-0131-004
16
16
23. [TEST]
This command performs a test on the internal
memory. Upon completion, the system will
display the results. If there are no problems, the
system will display the following:
MEMORY IS GOOD
Otherwise, failures will be indicated.
Command Format: [TESTCnUi]
Cn = Card ID (n = slot # from 1 to max slots)
Ui
= Unit ID (i = # from 0 to 9)
Example:
There is an MT105-100/101 in slot 10. In order
to test the internal memory, send the command
[TESTC10].
24. [MATmXy]
This matrix command allows the matrix switcher
to be setup for different matrix sizes. The tables
below show how the inputs and outputs will be
configured when the matrix is changed.
Example:
In the 8x4 configuration, when Input 1 is
connected to Output 8, the entire channel, 1a
and 1b, will be switched to outputs 8a and 8b
respectively.
Command Format: [MATmXyCnUi]
m = number of inputs (m = 16, 8 or 4)
y = number of outputs (y = 8, 4 or 2)
Cn = Card ID (n = slot # from 1 to max slots)
Ui
= Unit ID (i = # from 0 to 9)
16 X 8
8 X 4
IN
OUT
IN
OUT
O
9
O
1
O
1
O
5a
O
1a
O
1a
O
10
O
2
O
2
O
5b
O
1b
O
1b
O
11
O
3
O
3
O
6a
O
2a
O
2a
O
12
O
4
O
4
O
6b
O
2b
O
2b
O
13
O
5
O
5
O
7a
O
3a
O
3a
O
14
O
6
O
6
O
7b
O
3b
O
3b
O
15
O
7
O
7
O
8a
O
4a
O
4a
O
16
O
8
O
8
O
8b
O
4b
O
4b
4 X 2
IN
OUT
O
3a
O
1a
O
1a
O
3b
O
1b
O
1b
O
3c
O
1c
O
1c
O
3d
O
1d
O
1d
O
4a
O
2a
O
2a
O
4b
O
2b
O
2b
O
4c
O
2c
O
2c
O
4d
O
2d
O
2d
25. [HELP]
This command displays information available for
the Multi-Tasker interface commands.
Command Format: [HELPCnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui
= Unit ID (i = # from 0 to 9)
Example:
In order to display the RS-232 commands
available for the MT105-100/101 card in slot 4,
send the command [HELPC4]. The commands
along with a brief description will be displayed in
the terminal window.
GROUP COMMANDS
The next few commands are group commands.
The use of groups allows several boards, with the
same functions, to be controlled simultaneously
with a single command. These commands apply to
all cards, not only the MT105-100/101.
26. [WR]
This command groups multiple cards in the
enclosure allowing all the group members to be
controlled simultaneously with the same
command. Each Multi-Tasker™ unit may define
a maximum of eight groups.
In Multi-Tasker™ systems with audio and video
cards, boards are typically grouped as follows:
Group 1 = Video Cards
Group 2 = Audio Cards
Group 3 = Video and Audio Cards