0 installation – APC 2000 User Manual
Page 16
Page 14
4.0 Installation
4.1 Receiving inspection
Once the UPS has been removed from its shipping container, it should be inspected for
damage that may have occurred while in transit. Immediately notify the carrier and
place of purchase if any damage is found. The packing materials are made from
recyclable materials and should be saved for reuse or disposed of properly.
4.2 Placement
The UPS may be installed in any protected environment. The location should provide
adequate air flow around the unit, in an atmosphere free from excessive dust.
Do not operate the UPS in an environment where the ambient temperature or humidity
is outside the limits given in the Specifications section of this manual.
Note:
Allow 1" (2.5 cm)
minimum clearance on all
sides for proper ventilation.