Alcatel-Lucent OMNIACCESS 740 - Manual (Page 36)

Installing the OmniAccess 740
Left running head:
Chapter name (automatic)
28
Beta Beta
OmniAccess 740 Hardware User’s Guide
Alcatel-Lucent
E QUIPMENT G UIDELINES
The following guidelines will help to ensure your safety and protect the equipment.
This list does not cover all potentially hazardous situations. However,
Alcatel-Lucent advices you to observe caution while working with the system.
Warning: To avoid hazard from electrical shock and/or fire, adhere to safety practices listed in
this section and identified within instructions of this document.
Warning: Do not turn ON/OFF the OA-740 without following the stated procedure.
Warning: Potentially hazardous voltage inside. Service should be performed only by qualified
personnel.
• The OA-740 is in compliance with national and local electrical codes.
• Review the safety warnings before installing, configuring, or maintaining the
OA-740.
• Keep the system area clean and dust-free during and after installation.
• Keep tools and rack shelf components away from walk areas.
• Do not wear loose clothing, jewelry, or other items that could get caught in the
rack/shelf. Fasten your tie or scarf and sleeves.
• The equipment grounding should be in accordance with local and national
electrical codes.
• Input and earth wiring must be provided at the installation site and protected in
accordance with local and national wiring regulations.
• The OA-740 operates safely when it is used in accordance with its marked
electrical ratings and product usage instructions.