ALESIS ANDROMEDA A6 - Manual (Page 110)

Chapter 5: Oscillators and Filters
108 A NDROMEDA A6 R EFERENCE M ANUAL
Since there is only one front panel knob for ENV 1 control, the LIVE parameter allows
the selection of which oscillators were affected by turning the ENV1 AMOUNT knob.
This way you can have one oscillator set to a constant value while the other would be
controlled by the ENV1 AMOUNT knob. Or you can have the ENV1 AMOUNT knob control
both oscillators. The soft knobs control the ENV1 AMOUNT settings regardless of the
LIVE settings. The LIVE setting is only for the ENV1 AMOUNT knob on the front panel.
Once you have selected which VCO(s) to modulate by ENV 1 , use the ENV 1 (PITCH)
controls on the upper right-hand area of the front panel to adjust the characteristics
of this envelope as it affects the frequency of OSC 1, OSC 2 or both VCOs. The basics of
envelope operation are provided in Chapter 6.