ALESIS ANDROMEDA A6 - Manual (Page 159)

Chapter 6: Modulation and Envelopes
A NDROMEDA A6 R EFERENCE M ANUAL 157
In EXAMPLEs 5 , 6 and 7 , the envelope looks at the LFO for absolute values: positive or
negative attributes are ignored – just the level of 75 is used.
EXAMPLE 5
User Parameters:
Trigger In Level = 75
Trigger Polarity = ABS
BIPOLAR
EXAMPLE 6
User Parameters:
Trigger In Level = 75
Trigger Polarity = ABS
POSITIVE
EXAMPLE 7
User Parameters:
Trigger In Level = 75
Trigger Polarity = ABS
NEGATIVE
RETRIG Page
The parameters of the
RETRIG page are identical to those of the TRIG page. RETRIG ,
however, adds an additional parameter called STAGE .
When re-triggering an envelope, you have the added ability to determine at what
stage in the envelope’s cycle where re-triggering takes place. By contrast, the first
trigger that an envelope receives (
TRIG parameters) always starts at the DELAY stage.
You use soft knob 5 to select the desired stage. When re-triggered, the envelope will
start at the beginning of the selected stage:
DEL DELAY stage
ATK ATTACK stage
D1 D1TIME ( DECAY 1 ) stage
D2 D2TIME ( DECAY 2 ) stage
SUS SUSTAIN level; note that sustain will be by-passed if the key or sustain
pedal is not down.
R1 R1TIME ( RELEASE 1) stage