Actiontec electronic MI408 - Manual (Page 96)

94
Actiontec Broadband Router User Manual
95
Chapter 7 Using Advanced Settings
Restoring Default Settings
If the Router’s factory default settings need to be restored (to build a new network
from the beginning, for example), use the following procedure:
1. If needed click Save Configuration File to save the Router’s current con-
figuration to a file. The Router’s current settings can then be reapplied (see
“Configuraton File” in this chapter for more information).
2. Click Restore Defaults. The Router will restart, and factory default settings
will be applied
☞
Note: All of the Router’s settings and parameters will be restored
to their default values after performing the Restore Default pro-
cedure. This includes the administrator password; a user-speci-
fied password will no longer be valid.
Reboot the Router
To reboot the Router:
1. Click Restart in the Advanced screen. The “Restart” screen appears.
2. Click OK to restart the Router. This may take up to one minute.
To reenter the MegaControl Panel after restarting the Router, click the web brows-
er’s “Refresh” button.