AeroGarden Mini 300291 - Manual (Page 11)

Unplug the AeroGarden Mini.
Disconnect Air Hose from back of Bowl.
Remove Bowl from Base.
Raise Lamp Arm/Lamp Hood:
• Hold Lamp Arm.
• With other hand, support the
Lamp Hood and use thumb to
push in Locking Button.
• Release Locking Button while
pulling up on Lamp Arm.
• Locking Button will automatically
click into next notch.
Replace Bowl on Base.
Insert Air Hose from back of Base
into Bowl (see step 1-G).
Plug in the AeroGarden Mini.
10
2
1
3
5
4
Raise Lamp Hood/Lamp Arm
As plants grow, raise the Lamp Hood/Arm one notch at a time, keeping the plants about 1” from the
lights. Be sure the Arm is set to the lowest position when you start your AeroGarden Mini.
Note: When lowering Lamp Hood,
be sure to hold Lamp Arm to
avoid crushing plants.
6
7