AT&T CL81201 - Manual (Page 40)

Directory
35
Speed dial
The telephone base has 10 speed dial locations (0-9) where
you can store the telephone numbers you wish to dial more
quickly. You can store up to 30 digits in each location. Speed
dial assignments can only be selected from existing directory
entries. In the directory, speed dial locations are indicated by
their number in the bottom right hand corner of the entry.
Assign a speed dial number
1. When the telephone is idle, press
MENU
/SELECT
.
2. Press
MENU/
SELECT to select >Directory.
3. Press q
CID
or p
DIR
to scroll to >Speed dial. Press
MENU/
SELECT.
4. Press q
CID
or p
DIR
to choose your desired speed dial
location (0-9), then press
MENU
/SELECT. The screen
briefly shows Copy from Directory... then enters your
directory list.
5. Press q
CID
or p
DIR
to scroll to the phone number you wish
to assign to the selected speed dial location.
6. Press
MENU
/SELECT to save the setting and return to the
previous menu. There is a confirmation tone.
Reassign a speed dial number
1. When the telephone is idle, press
MENU/
SELECT
.
2. Press
MENU
/SELECT to select >Directory.
3. Press q
CID
or p
DIR
to scroll to >Speed dial.
Press
MENU MENU
/SELECT.
4. Press q
CID
or p
DIR
to choose the location you wish to
reassign, then press
MENU
/SELECT to show the directory entry.
5. Press
MENU
/SELECT again.
6. Scroll to >Change SD and then press
MENU
/SELECT. The
screen briefly shows Copy from Directory... then enters your
directory list.
7. Press q
CID
or p
DIR
to scroll to the phone number you wish
to reassign to the selected speed dial location.
8. Press
MENU
/SELECT to save the setting and return to the
previous menu. There is a confirmation tone.
Add contact
>Speed dial
p
q
>1:Robert Brown
2:<empty>
p
q
>Directory
Caller ID log
p
q
Copy from
Directory...
Robert Brown
888-883-2445
p
q
1
Linda Miller
888-722-7702
p
q
1
Robert Brown
888-883-2445
p
q
1
Speed dial location