HP StoreEver Ultrium Tape Drives - Manual (Page 19)

Supplied SAS cable
Power is supplied from the SAS connector on the SAS cable supplied with HP LTO–6 Ultrium 6650
and LTO-5 Ultrium 3280 tape drives.
Figure 12 SAS with power cable supplied with LTO–6 Ultrium 6650 and LTO-5 Ultrium 3280
internal tape drives
Unused second branch on supplied cable 2. Mini-SAS connector to server (remove cover) 1.
SAS connector to tape drive 4. Mini-SAS connector on second branch (unused,
do not remove cover) 3.
Power cable and connector to server's power
supply 5.
The SAS connector on the cable supplied with all other HP LTO Ultrium tape drives does not provide
power. There is a separate power connector on the rear of the tape drive.
Figure 13 SAS without power cable supplied with LTO–4 Ultrium 1840 internal tape drives
Unused second branch on supplied cable 2. Mini-SAS connector to server (remove cover) 1.
SAS connector to tape drive 4. Mini-SAS connector on second branch (unused,
do not remove cover) 3.
NOTE: The cable supplied with the tape drive is suitable for connecting to a mini-SAS
(SFF-8086/8087) connector on a dedicated HBA or on the server's SAS controller. If your server
has a SAS 4i connector (SFF-8484), a suitable cable is available, but must be purchased separately,
see
http://www.hp.com/storage/spock .
Connect SAS and power cords 19