HP Compaq t5510 Thin Client - Manual (Page 69)

5-13
Setup Menus
Direct Print Data To A Network Printer
To direct print data to a printer on the network, select Use Network Printer (LPR)
and enter the LPD Hostname. Clicking the Setup button will display a dialog box
which enables you to specify various print settings.
You must specify the Printer Name. The Job Name and User Name entries are
optional (the User Name will default to root if none is specified). The Number of
Copies to print is set to 1 by default. You can specify how many times the LPR
protocol will attempt to execute the print job before cancelling by setting the number
of Retries and the number of seconds delay between each attempt. When Add Banner
is selected, information about this print job will be printed with it. You can display a
message box which will indicate the progress of the print job by selecting Debug
Information.
Print Screen
This enables you to produce a hardcopy of data displayed on the screen. The Print
Screen dialog box will be displayed when a printer handled by the Print Manager is
selected in the Printer Setup dialog box.