HP Matrix Operating Environment Software User Manual
Page 105
When using active/active configuration, the Redundant flag must be left deselected, and you
must explicitly wire two separate Virtual Connect networks to represent the same active/active
network in the data center.
6.
In the Software tab, select the OS and any additional software.
7.
(Optional) On the Load Balance tab, request a load balancer containing the specified attributes
to distribute network traffic across servers in a virtual or physical server group.
For more information about configuring load balancers, see
.
8.
Configure the Physical Storage component. The Storage Type is FC-SAN.
Check Select a storage template or Specify desired attributes. See
for a description of these options.
Select the Disk is bootable checkbox. Leave the RAID Level set to Any.
Creating infrastructure orchestration templates 105