HP StoreEver Ultrium Tape Drives - Manual (Page 16)

Table 3 Power specifications
All Ultrium half-height tape drives
Power consumption
13 Watts idle,
20 Watts typical,
33 Watts maximum
Power requirements
+5V @ 2.5A typical
+5V @ 2.5A maximum
+12V @ 0.7A typical
+12V @ 2.1A maximum
Power requirements,
nl external tape drives
100–240 VAC, 50-60 Hz, auto-ranging, 0.7A maximum
Usage models
HP StorageWorks Ultrium tape drives can be used in a standalone or network environment. However,
they should always be directly attached to suitably-rated SCSI connector on the storage server.
A Server
B Tape drive
Figure 2 Usage model
The following table shows the recommended usage models and “ Optimizing performance ” on page 58
provides further information about factors that can affect performance.
16 Before you start