Unloading a cartridge, 19 inserting a cartridge – HP StoreEver Ultrium Tape Drives User Manual
Page 44
Advertising
1. Arrow indicates leading direction
2. Label area
3. Cartridge door
4. Ready light
Figure 19 Inserting a cartridge
2.
Apply gentle pressure until the drive takes the cartridge and loads it. (See
3.
The Ready light flashes green while the drive performs its load sequence. When the cartridge is
loaded, the Ready light shows steady green.
Unloading a cartridge
CAUTION:
Never try to remove a cartridge before it is fully ejected.
1.
Press the Eject button on the front panel.
44
Operating your tape drive
Advertising