HP Matrix Operating Environment Software - Manual (Page 76)

Figure 54 Integrity Virtual Server Manager Tools menu
Table 9 describes the Tools menu options and where to obtain more information in this manual.
More detailed information is provided by the Integrity Virtual Server Manager help.
Table 9 Integrity Virtual Server Manager Tools menu options
More Information Action Summary Menu Selection
“Starting VMs” (page 90) .
nl
This menu is enabled only for VMs. Tools
→Start VM...
“Stopping VMs” (page 91) .
nl
This menu is enabled only for VMs. Tools
→Stop Virtual Machine...
“Restarting VMs” (page 93) .
nl
This menu is enabled only for VMs. Tools →Restart Virtual Machine...
“Suspending VMs” (page 99) .
nl
This menu is enabled only for VMs. Tools
→Suspend Virtual Machine...
“Resuming VMs” (page 100) .
nl
This menu is enabled only for VMs. Tools
→Resume Virtual Machine...
“Booting vPars” (page 114) Boots a vPar starting up the hardware
for the vPar, taking it from an Off state
(powered off) to an On state (powered
on). Tools →Boot Virtual Partition...
“Stopping vPars” (page 115) Stops a vPar, taking it from an On
state (powered on) to an Off state
(powered off). Tools →Stop Virtual Partition...
“Resetting vPars” (page 115) Restarts an already started vPar,
taking it first to an Off state (powered
off) and then to an On state (powered
on). Starts a stopped vPar. Tools
→Reset Virtual Partition...
76 Using Integrity Virtual Server Manager menus