AT&T 1080 Corded telephone - Manual (Page 16)

9
Telephone operation
Basic phone operation
This phone comes programmed to use line 1
(default prime line) for calls if you do not press a
line button. (To change the prime line, see
PRIME
LINE on page 39 of the installation guide.) When
you answer a call, the phone automatically selects
the ringing line.
Lit line indicators
The four indicators above the [LINE] keys will
indicate the state of the corresponding phone line.
The four
LINE lights have two colors:
•
Green is for outside calls.
a. On when the line is in use on this phone.
b. Flashes slowly when the line is on hold.
c. Flashes rapidly when there is a transferred
call on the line.
d. Flashes quickly when there is an incoming
auto attendant transferred call on the line.
e. Flashes rapidly when there is an incoming
call on that line.
•
Red is for the state of the phone system.
a. On when another phone is using the line.
b. Flashes slowly when the line is held by
another phone on the same system.
Making and answering calls
This phone will automatically make and answer
calls in the mode (speakerphone or headset) you
programmed (see
AUTOMATIC MODE on page 39
of the installation guide.). Follow the directions on
the next page to choose a mode manually. If the
phone is in use on one line, any other calls made
or answered will use the same mode already in
use.
continued on next page