AT&T 1080 Corded telephone - Manual (Page 21)

14
Telephone operation
Basic phone operation
RINGER ON/OFF
This feature controls whether there is an audible
alert for outside calls on the designated line.
1. Press [ENTER].
2. Press [ ] or [ ] until you see PHONE SETTINGS.
Press [ENTER].
3. Press [ ] or [ ] until you see RINGER ON/OFF.
Press [ENTER].
4. Press [ ] or [ ] to select the desired line
( L1 RINGER, L2 RINGER, L3 RINGER or L4
RINGER).
5. Press [ ] or [ ] to turn the ringer ON or OFF.
ON is the default setting.
6. To move to the next line, press [ ].
-OR-
To exit setup, press and hold
[ENTER].
RINGER TYPE
Use this feature to choose one of the four ringer
types for incoming calls. You can choose different
ringer types for the different lines so you can
easily identify which line is ringing.
1. Press [ENTER].
2. Press [ ] or [ ] until you see PHONE
SETTINGS. Press [ENTER].
3. Press [ ] or [ ] until you see RINGER TYPE.
Press [ENTER].
4. Press [ ] or [ ] to highlight the desired
line ( L1 RINGER TYPE, L2 RINGER TYPE, L3
RINGER TYPE or L4 RINGER TYPE).
5. Press [ ] or [ ] to highlight the desired ringer
type ( TYPE 1, TYPE 2, TYPE 3 or TYPE 4).
6. To move to the next line, press [ ].
-OR-
To exit setup, press and hold [ENTER].
RINGER TYPE
TYPE 1
L1 RINGER TYPE
RINGER ON/OFF
ON
L1 RINGER