Show interconnect info, Show interconnect – HP Onboard Administrator User Manual
Page 208
Se debe disponer de acceso explícito al compartimento indicado en el comando ASSIGN
INTERCONNECT.
●
Ejemplo:
OA-0018FE27577F> show interconnect info 1
show interconnect info all
1. Ethernet
Product Name: HP VC FlexFabric 10Gb/24-Port Module
Width: Single
URL to Management interface: http://172.16.1.70/
In-Band IPv4 Address: 172.16.1.70
User Assigned Name:
Part Number: 571956-B21
Spare Part Number: [Unknown]
Serial Number: TW29460027
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
Internal Ethernet Route to OA: Enabled
Internal Serial Interface to OA: Present
Internal Serial Route to OA: Enabled
Serial Port Baud Rate: 115200
External Serial Port Interface: Absent
External Ethernet Interface: Absent
Manufacturer: HP
Firmware Version: 4.10
SHOW INTERCONNECT INFO
●
Comando:
SHOW INTERCONNECT INFO {PORT MAP | POWERDELAY | SESSIONS | STATUS}
[ALL | <número de compartimento> | <número de compartimento>-<número
de compartimento>]
●
Descripción:
Muestra:
◦
Tipo de interconexión
◦
Información de IPv4
ESES
SHOW INTERCONNECT INFO 195