Audiovox D900 - Manual (Page 59)

59
a. Select TV DISPLAY using UP/DOWN, and then press RIGHT to enter the submenu.
Select the TV display mode on the screen using UP/DOWN, and press ENTER to con-
firm the setting. Press LEFT to return.
* NORMAL/PS: When the player is connected to a normal TV, and a wide picture is
shown on the full screen, with a portion that may be cut off automatically.
* NORMAL/LB: When the player is connected to a normal TV, and a wide picture is
shown on the screen, with black strip at both top and bottom of the screen.
* WIDE: When the player is connected to a wide screen TV, a wide picture is shown on
the full screen.
b. Select TV TYPE using UP/DOWN, and then press RIGHT to enter the submenu. Select
the TV TYPE mode on the screen using UP/DOWN, and press ENTER to confirm the
setting. Press LEFT to RETURN.
*NTSC: Select this option when the DVD player is connected to an NTSC TV.
*PAL: Select this option when tne DVD player is connected to a PAL TV.
Note:
This selection is for DVD Output and not the TV Tuner.
Please note the USA uses NTSC Only. Do not change unless you know what you are
doing.