Audiovox D900 User Manual
Page 66
66
I. System Operation
1. Press POWER to switch the unit on or off. The switch indica-
tor will light red and the unit will go to the mode last used and
stored in memory.
2. Press DVD/TV/AV to select your desired mode. When switch-
ing the mode, the DVD player can memorize the present play
-
ing point.
3. Press VOLUME UP/DOWN to raise or lower the sound level
Also used to make picture adjustments in the picture select
mode.
4. Each time PICture is pressed, the on screen picture adjust-
ment display cycles through “adjustment bars for VOLUME,
CONTRAST, BRIGHTNESS, COLOR and TINT. Then
use VOLUME UP/DOWN to raise or lower the level. This dis-
play will automatically turn off if no adjustments are made within
about 6 seconds, or if any other button is pressed.
5. Press MUTE to cut off all sound; pressing this button again
restores sound to the previously set level. MUTE may also be
released by pressing the VOLUME UP/DOWN.
J. Watching TV
1. Connect the coax cable into the build in antenna socket.
(Refer to Page 48 Item # 24)
2. With power applied to the system and the TV mode selected,
press TV/CATV on the remote control to select the regular 69-
channel Broadcast TV and the
S41-Channel Cable TV (Stan-
dard Cable, HRC Cable, and IRC Cable) with on-screen dis-
play.
Note:
Please contact your local cable provider to verify what
cable standard you are on.