HP LaserJet 5200 Printer series - Manual (Page 103)

Cleaning the printer
During the printing process, paper, toner, and dust particles can accumulate inside the printer. Over
time, this buildup can cause print-quality problems, such as toner specks or smearing (see
Troubleshooting print-quality problems on page 125 ). This printer has a cleaning mode that can correct
and prevent these types of problems.
To clean the printer using the printer control panel
1. Press Menu .
2. Press to highlight CONFIGURE DEVICE, and then press .
3. Press to highlight PRINT QUALITY, and then press .
4. Press to highlight CREATE CLEANING PAGE, and then press .
5. Remove all paper from tray 1.
6. Remove the cleaning page and load it face-down in tray 1.
NOTE: If you are not in the menus, navigate to PRINT QUALITY by using the previous
instructions.
7. At the printer control panel, press to highlight PROCESS CLEANING PAGE, and then
press .
ENWW Cleaning the printer 91