HP LaserJet 5200 Printer series - Manual (Page 90)

Managing memory
The printer supports up to 128 MB of memory. You can add additional memory by installing a dual inline
memory module (DIMM) in the DIMM slot, which accepts 32, 48, 64, or 128 of RAM. For information
about installing memory, see
Working with memory on page 171 .
The printer uses 100-pin 133 MHz DDR memory modules. Extended data output (EDO) DIMMs are not
supported.
NOTE: If memory problems occur when you are printing complex graphics, you can make more
memory available by removing downloaded fonts, style sheets, and macros from printer memory.
Reducing the complexity of a print job from within a program can help avoid memory problems.
NOTE: Be sure to update the printer configuration in the printer driver after adding memory. See
Enabling memory for Windows on page 179 .
78 Chapter 4 Printing tasks ENWW