Ameriphone ALERTMASTER AM-RX2 - Manual (Page 18)

E
N
G
L
I
S
H
Regulatory
Compliance
Part 68 of FCC Rules
Information
This AM-100 Notification
System complies with Part
68 of the FCC rules and the
requirements adopted by
the ACTA. On the bottom
of this equipment is a label
that contains, among other
information, a product
identifier in the format
US:AAAEQ##TXXXX. If
requested, this number must
be provided to the
telephone company.
A plug and jack used to
connect this equipment to
the premises wiring and
telephone network must
comply with the applicable
FCC Part 68 rules and
requirements adopted by
the ACTA. A compliant
telephone cord and
modular plug, RJ11 USOC,
is provided with this
product. It is designed to be
connected to a compatible
modular jack that is also
compliant. See installation
instructions for details.
The REN is used to
determine the number of
devices that may be
connected to a telephone
line. Excessive RENs on a
telephone line may result in
the devices not ringing in
response to an incoming
call. In most but not all
areas, the sum of RENs
should not exceed five
(5.0). To be certain of the
15
F
R
A
N
Ç
A
I
S