Deleting host security groups, Setting the host mode for ibm storage systems, Setting the host – HP Storage Essentials NAS Manager Software User Manual
Page 405: Mode for ibm storage systems
Storage Essentials 5.1 User Guide 373
NOTE:
Keep in mind that for Engenio storage systems LUN numbers cannot be duplicated,
and that the management server can use an existing LUN number if the access mode is “No
Access” for the created LUN.
CAUTION:
Removing an HBA can cause hosts that are using it to lose access to their
storage. This may result in data loss.
• Remove a volume - Click corresponding to the volume you want to remove from the
host security group.
• Remove multiple volumes - To remove multiple volumes from the host security group,
select the volumes you want to remove and then click Remove Selected.
2.
Click Finish.
Deleting Host Security Groups
IMPORTANT:
You cannot delete the default host security group.
To delete a host security group:
1.
Click Tools > Storage Essentials > Provisioning Manager in HP Systems Insight Manager.
2.
In the right pane, click the Storage Systems tab.
3.
In the right pane, click the Provision button corresponding to the storage system in which you
want to access information about host security groups.
4.
Click Step 3 Host Security Group.
5.
Click the button corresponding to the host security group you want to delete.
The host security group is removed.
6.
To remove multiple host security groups, select the host security groups you want to remove.
Then click Delete Selected.
Setting the Host Mode for IBM Storage Systems
The host mode for an IBM storage system cannot be set in the user interface. You can set the host
mode by assigning the host mode to the
smi.ProvisioningIbmEss.hostConnectionProfile property, as described in the
following steps:
1.
ClickOptions > Storage Essentials > Manage Product Health. Then, click Advanced in the
Disk Space tree.
1.
Click Show Default Properties at the bottom of the page.
2.
Copy smi.ProvisioningIbmEss.hostConnectionProfile. How you copy the text
depends on your Web browser. If you are using Microsoft Explorer or Netscape Navigator,
select the text and then right-click the selected text. Then, select Copy.