HP Storage Essentials NAS Manager Software - Manual (Page 92)

Discovering NAS Devices, Tape Libraries, Switches and Storage Systems 60
Engenio storage
systems
Can be discovered two ways:
• Entering the IP address/DNS
name, user name and
password of a controller for an
Engenio storage system.
Discovers only the
corresponding IP address of the
controller.
• Entering the IP address/DNS
name, user name and
password of a proxy that is
used to manage an Engenio
storage system. Discovers all
controllers known to the proxy.
See ” Discovering Engenio
Storage Systems ” on page 65.
HDS storage
systems
Discover the server running
HiCommand Device Manager.
See ” Discovering HDS Storage
Systems ” on page 66 for more
information.
HP storage systems Discover the server running the HP
CIMOM.
See ” Discovering HP
StorageWorks XP Arrays ” on
page 70.
IBM Storage
Systems
Discover the CIMOM that talks to
the IBM storage systems you want
to monitor.
See ” Discovering IBM Storage
Systems ” on page 73.
Sun StorEdge 3510 Discovered through proxy software
called Sun StorEdge™
Configuration Service. On the
discovery page the user should
enter the hostname or IP address of
the computer running the Sun
StorEdge 3510 SMI-S provider.
See ” Discovering Sun StorEdge
3510 Storage Systems ” on
page 75.
Sun StorEdge 6920
and 6940
Discover the storage system
directly.
See ” Discovering Sun StorEdge
6920 and 6940 Storage
Systems ” on page 77.
Sun StorEdge 6130 Discover the storage system
directly. The username does not
matter. The password matters only
for provisioning.
See ” Discovering Sun StorEdge
6130 Storage Systems ” on
page 77.
Table 11 Discovery Requirements for Storage Systems, Tape Libraries & NAS Devices (continued)
Element Discovery Requirements Additional Information