Cli commands, Configuring with the cli utility – HP FlexFabric 10Gb 2-port 534M Adapter User Manual
Page 18
CLI commands 18
CLI commands
Configuring with the CLI utility
An alternate method to BACS for configuring network adapters is BACSCLI, a utility that enables you to view
information and configure network adapters using a console in either a non-interactive command line
interface (CLI) mode or an interactive mode. BACSCLI provides information about each network adapter and
enables modification of property values.
For a complete list of commands and examples, see the BACSCLI ReadMe text file available with the
installation.
Supported operating systems
BACSCLI is supported on the following operating systems:
•
Windows Server 2008 (including Server Core)
•
Windows Server 2008 R2 (including Server Core)
•
Windows Server 2012 (including Server Core)
•
SuSE Linux Enterprise Server(SLES) 11 32 and 64 bit
•
Redhat Enterprise Linux Redhat 5 32 and 64 bit
•
Redhat Enterprise Linux Redhat 6 32 and 64 bit
Installation
BACSCLI is installed when BACS is installed with the installer.