HP ProLiant DL140 G3 Server User Manual
Page 53
Server management 53
6.
From the remote system open a DOS window and type in telnet <server’s IP address>.
7.
Enter the login name and password.
The Lights-Out 100 Management screen will be displayed.
Figure 26 CLI interface screen via a NIC port
To use the COM port for CLI interface access:
1.
Connect a peer-to-peer modem cable between the system’s COM port and a Windows client PC.
A client PC running a different OS can also be used as long as it supports HyperTerminal capability.
2.
Follow the HP standard procedures for turning on the system.
3.
Turn on the client PC and launch the HyperTerminal program.
The Connection Description dialog box appears.
4.
Enter a name and select an icon for the new connection, then click OK.
5.
Click File | Properties to open a new connection Properties window.
6.
Configure the COM port as follow.
Figure 27 HyperTerminal COM port configuration
a. Select COM1 in the Connect using field.
b. Click Configure….
c. Select 9600 in the Bit per second
field.
d. Select None in the Flow control field.
e. Click OK to save the port settings.
f. Click OK to apply the new COM port settings.