HP ProLiant DL140 G3 Server - Manual (Page 6)

System BIOS configuration 6
Table 1 Setup Utility’s navigation keys
Key Function
F1 or Alt-H To bring up the General Help window.
The General Help window describes other Setup navigation keys that are not displayed on the legend bar.
F9 Press to load default system values.
F10 Press to save changes and close the Setup Utility.
Setup Utility primary menus
The Setup Utility’s menu bar displays the six primary menu selections. For detailed information and related
screenshots of these Setup menus, refer to the succeeding sections.
NOTE: In the table following each of the menu screenshots, options in boldface are the system default settings.
Main menu
Figure 2 Setup Main menu
Table 2 Main menu fields
Field Description
ROM ID Info System ROM identification number
BIOS Version BIOS setup utility version
BIOS Date Date when the Setup utility was created
System Time Adjust the system time.
System Date Adjust the system date.
IDE Channel 0 Master Displays the current configuration of the IDE device connected to the master port of the primary
IDE channel.
Press Enter to access the related submenu.
SATA Port 1/2 Displays the current configuration of the hard drive connected to the SATA ports.
Press Enter to access the related submenu.
Boot Features Set which options to run during system bootup.
Press Enter to access the related submenu.
System Memory Amount of conventional memory detected during POST
Extended Memory Amount of extended memory detected during POST
System Asset Tag
System Serial Number
Enter the server asset tag and serial number. These information are printed on the serial label
pull tab located on the front panel.
Note: If you install additional memory, the system automatically adjusts the System/Extended Memory fields to reflect the new
memory size.