HP Scanjet 7800 Document Sheet-feed Scanner - Manual (Page 14)

3 Scan and copy
● Basic scanning steps
● Basic copying steps
● Scan two-sided originals
● Scan a card in the card slot
● Load originals
● Use the scanner buttons
● Scan from HP Smart Document Scan Software
● Scan from other software programs
Basic scanning steps
The basic steps for scanning are:
1.
Load the originals. For more information, see Load originals .
2. Do one of the following:
–
Use the Select Profile Number ( ) button on the scanner front panel to select
a profile, and then press the Scan Document To ( ) button.
For information about profiles, see
Set up profiles .
– Open HP Smart Document Scan Software. For more information, see Scan
from HP Smart Document Scan Software .
– Open another scanning software program. For more information, see Scan from
other software programs .
Tip Descriptions of the profiles can be found in the HP Smart Document Scan
Software , on the profile label on the pull-down tray on the front of the scanner, or
in the Button Settings Utility .
Basic copying steps
The basic steps for copying are:
1.
Load the originals. For more information, see Load originals .
2. Use the Number of Copies ( ) button on the scanner front panel to select the
number of copies, and then press the Copy ( ) button.
Copies are printed on the computer's default printer.
Scan two-sided originals
The steps for scanning or copying two-sided originals are the same as for one-sided
originals. In the HP Smart Document Scan Software, select Duplex (for two-sided
printing). The scanner processes both sides of the original in one pass.
12 HP Scanjet 7800 Scanner