HP StorageWorks 2405 Disk System - Manual (Page 6)

6
Step 3: Install the device 41
Installing the Storage Device into a Rack System/E 41
Installing the storage device into an HP Computer Cabinet 49
Installing the Storage Device into a Rittal-Style Rack 56
Install the Disk System 63
Step 4: Configure LCCs 64
Step 5: Set LCC Switches 66
Step 6: Connect FC and Power Cables 72
Step 7: Install Disk Modules 75
Step 8: Turn on the Disk System 76
Step 9: Verify Devices on the Host 78
Sample IOSCAN 78
Where do you go from here? 79
3 Configuration 81
Viewing a Disk System in IOSCAN 81
Sample IOSCAN 81
Interpreting the Hardware Path 83
Loop IDs and Hardware Paths by Enclosure ID 84
Setting Up the Hardware Event Monitor 88
Aliasing Devices (HP-Qualified Only) 88
Using SAM 88
Using STM (HP-Qualified Only) 88
Updating Firmware (HP-Qualified Only) 90
4 Troubleshooting 93
Overview 93
Event Notification 93
Status LEDs 96
Online Status Information 98
Viewing Component Status in SAM 98
Viewing the STM Information Log 99
Interpreting Status Values 100
Checking the Fibre Channel Link 102
Isolating Causes 104